Guide
Grease trap installation cost in 2026
Updated
A grease trap installation is two costs: the trap, which suppliers publish, and the fitting, which almost nobody does. Here are UK unit prices and what decides the fitting price.
Get cleaning quotes Two minutes of questions; up to three commercial drainage contractors quote you directly. Free, no obligation.
What the trap itself costs
| Trap and capacity | Supplier | Published price |
|---|---|---|
| 20 litre stainless under-sink kit (GT20) | The Grease Trap Store | £169.00 (£202.80 inc. VAT) |
| 40 litre commercial trap | The Grease Trap Store | £179.00 (£214.80 inc. VAT) |
| 60 litre stainless under-sink trap (GT60) | Cater Kitchen | £234.00 |
| 100 litre under-sink trap (GT100) | The Grease Trap Store | £279.00 (£334.80 inc. VAT) |
| 190 litre grease trap | Tanks Direct | £283.00 |
| 500 litre below-ground separator (Klargester NSG01) | Direct Drainage | £2,104.00 |
Small under-sink traps cost a few hundred pounds; a below-ground separator sized for a busy kitchen costs thousands before any digging. Every price is in our grease trap capacity price board with the page and the date it was read.
What sets the fitting cost
- Size and location: an under-sink trap is a plumbing job of a few hours; a below-ground separator needs excavation, a concrete base, new drain runs and reinstatement, which is groundwork priced on survey.
- Sizing to the standard: BS EN 1825 sets how a separator is sized from flow and use, and Approved Document H expects commercial kitchens to have grease separation. An undersized trap fills faster and costs more in emptying visits for its whole life.
- Access for emptying: a trap a tanker hose can reach, or a lid kitchen staff can lift, keeps every later service visit cheaper.
- Out-of-hours work: fitting around service in a working kitchen often means evenings or closed days.
Installers rarely publish a fitted price. Of the 70 grease trap service firms' pages we read, two publish any price at all. The one installation page among them gives only a call-out from £120 (East London Commercials), not a fitted price. The only reliable fitting figure is a quote after a survey.
Getting it priced
- Know your flow. Covers per day, number of sinks and dishwashers: the installer sizes the trap from these.
- Ask for the unit and the fitting as separate lines, so you can compare the trap each firm proposes against the supplier prices above.
- Ask who will empty it, and how often. Approved Document H expects a separator to be emptied at least once every 12 months by a licensed contractor; see how often a kitchen like yours needs it, and what each visit costs.
- Get two or three quotes. Our form reaches local firms that fit and service grease traps.